Victoria Arduino VA 358 WHITE EAGLE Manuel D'instructions page 63

WASHING ALARM:
This function serves to set the timer (hours and
minutes) for the group wash alarm.
E.g. setting 1 h and 30 min., will cause the
machine to send a wash alarm message after
1h and 30 min.
It is possible to access this function pressing the
ENTER key.
and NON ACTIVE modes.
Selecting NON ACTIVE will return to the main
menu.
Selecting ACTIVE it is then necessary to use
after which the alarm message appears.
Sunday
WASHING ALARM
HH:00 MM: 15
1.21 bar
After the minutes have been set, the machine
returns to the main menu.
LANGUAGE:
Sunday
SETPOINT TEMP.
SETTING PASSWORD
WASHING ALARM
LANGUAGE
TEMPERATURE
LIGHT ADJUSTMENT
1.21 bar
ENTER key to visualise the lan-
guage already set. Choose the desired lan-
ENTER to confirm and pass to the
next step.
RESET to return to the previous page
without confirming.
UNIT OF MEASURE:
SETPOINT TEMP.
SETTING PASSWORD
WASHING ALARM
LANGUAGE
TEMPERATURE
21 March 14:45
LIGHT ADJUSTMENT
1.21 bar
ENTER to show the selected unit (Celsius
/ Fahrenheit).
measure.
ENTER to confirm and pass to the
next step.
RESET to return to the previous page
without confirming.
LIGHT ADJUSTMENT:
21 March 14:45
SETPOINT TEMP.
SETTING PASSWORD
WASHING ALARM
LANGUAGE
TEMPERATURE
LIGHT ADJUSTMENT
1.21 bar
the option to choose the intensity of brightness
to the key (between 1 and 8) and display
(between 1 and 10).
INFORMATION:
Sunday 21 March 14:45
The display shows the information of the elec-
tronic power board and of the display:
Sunday 21 March 14:45
set the intensity.
ENTER to confirm and pass to the
next step.
RESET to return to the previous page
without confirming.
Sunday 21 March
REL. POWER X.XX
REL. TFT X.XX
1.21 bar
14:45
63