Program Doses - Victoria Arduino VA 358 WHITE EAGLE Manuel D'instructions

Domenica 21 Marzo
DOSES TRANSFER
SELECT GROUPS
1.21 bar
at this point, the continuous coffee keys
of the second, third and fourth groups will
flash.
will stop flashing and remain lit) will transfer
the values programmed for the first group to
the other groups, one at a time.
ENTER key to confirm.
Sunday 21 March

PROGRAM DOSES

SELECT
1.21 bar
RESET
confirmation.
AUTOMATIC CLEANING CYCLE:
14:45
PROGRAM DOSES
AUTO.CLEAN.CYCLE
DELIVERY COUNT
ON-OFF PROGRAM
ENERGY SAVING
CUP-WARMER PROG.
1.21 bar
ENTER and the display will read:
(the key
AUTO.CLEAN.CYCLE
SELECT
14:45
1.21 bar
on and off. Insert the blind filter into the filter-
holder, add half a dose of detergent and
attach the filter-holder into the unit where
you intend to carry out the automatic clean-
ing cycle. Carrying out a cleaning cycle in
more than one unit at a time is possible.
key to start the unit automatic
cleaning cycle. The display will read:
AUTO.CLEAN.CYCLE
1.21 bar
Sunday 21 March 14:45
Sunday 21 March 14:45
DELIVERY COUNT:
will begin to flash
Sunday 21 March 14:45
1W
where 1W indicates that the cleaning cycle
has been activated within the 1st unit. Once
the cycle has been completed the selected
unit key will begin to flash on and off
again and the display will read:
Sunday 21 March
AUTO.CLEAN.CYCLE
1R
1.21 bar
Where 1R indicates that the group has been
to start the rinsing.
RESET key to view the next func-
tions or to quit the display mode.
Sunday 21 March
PROGRAM DOSES
AUTO.CLEAN.CYCLE
DELIVERY COUNT
ON-OFF PROGRAM
ENERGY SAVING
CUP-WARMER PROG.
1.21 bar
ENTER key the display will
read:
14:45
key
14:45
57