Victoria Arduino VA 358 WHITE EAGLE Manuel D'instructions page 61

Bar °C
FAULTS HISTORY:
Sunday
DATE/HOUR
DELIVERY TIME
SETPOINT PRESS.
FAULTS HISTORY
MAINTENANCE
POWER MANAGEMENT
1.21 bar
ENTER key, the display will
read for example:
Sunday
DOSER ERR. 1° GR
ERROR 01
1.21 bar
down the ten previous alarms saved in the
°F memory. After the tenth alarm, by pressing
page.
MAINTENANCE:
DATE/HOUR
DELIVERY TIME
SETPOINT PRESS.
FAULTS HISTORY
MAINTENANCE
POWER MANAGEMENT
1.21 bar
read:
21 March 14:45
DELIVE. 30000
01
JANUARY
2017
1.21 bar
ENTER to set the values.
ENTER key to confirm.
21 March 14:45
Once the set delivery limit or the set mainte-
nance date have been reached, the display
will visualize the message: MAINTENANCE.
To remove the MAINTENANCE message,
move the date forward or increase the num-
ber of coffees.
Once having carried out the modifications, reset
the inner counter of the cycles to make them
effective. Keep the
onds to reset the inner counter. A message rela-
tive to the counter zeroing will be displayed.
Sunday 21 March 14:45
ENTER key, the display will
Sunday 21 March 14:45
key pressed for 5 sec-
POWER MANAGEMENT:
This function serves to control the power
absorbed by the machine while it is heating up,
in order to limit consumption.
If enabled at switch on, the use of the steam
boiler, groups and group boiler will be split. The
soon as the steam boiler steam requirement
power.
At this point, the machine will resume working
as normal.
ACTIVE.
ENTER key to confirm.
Sunday
POWER MANAGEMENT
ACTIVE
1.21 bar
SETPOINT TEMPERATURE
(VERSION T3 ONLY):
pressing the ENTER key.
peratures of the boilers and units; the
ENTER key is used to confirm and pass to
the next value. When the last unit has been
confirmed, the function returns to the main
menu.
RESET key moves to the next
value to be adjusted; any changes made will
not be saved.
21 March 14:45
-
61