Inventum IVW6011A Manuel D'utilisation page 43

ADJUSTING THE HEIGHT OF THE RACKS OF THE UPPER BASKET
The racks can be moved up to create more space in the upper basket, for example to place different-sized glasses
under the racks or to place cutlery items on the racks.
1. Move the racks (A) up or down.
ADJUSTING THE HEIGHT OF THE UPPER BASKET
The complete upper basket can be moved to create more space in the upper basket or in the lower basket. When the
upper basket is in the upper position, you can place large items, such as pots and large plates, in the lower basket.
When the upper basket is in the lower position, you can place large plates in the upper basket.
1. Open the latch (A) on both guiding rails.
2. Remove the basket from the guiding rails.
3. Put the runners in the guiding rails:
a. Put the upper runners (B) in the guiding rails to put the basket in the lower position.
b. Put the lower runners (C) in the guiding rails to put the basket in the upper position.
4. Push the basket back in the guiding rails.
5. Close the latch on both guiding rails.
FOLDING THE RACKS OF THE LOWER BASKET
The racks can be folded down to create more space in the lower basket, for example to place large items (pots,
pans, etc.) in the basket. The racks can be folded separately or all together.
1. Push the racks (A) to fold them down.
2. Pull the racks upwards to put them in the up position.
REMOVING THE CUTLERY DRAWER
The cutlery drawer can be removed to create more space in the upper basket or it can be removed for easy loading.
1. Open the latch (A) on both guiding rails.
2. Remove the cutlery drawer from the guiding rails.
STARTING THE APPLIANCE
1. Push the on/off button to start the appliance.
CHOOSING A PROGRAM
Note:
For an overview of the programs, refer to section
1. Use the program selector button to choose a program. The display shows the selected program and the duration.
2. Use the timer button to delay the start time of the program. Refer to section
3. Use the half-load button to add the half-load option to the selected program.
Note:
If the half-load option is not compatible with the selected program, a buzzer sounds.
4. If necessary, cancel the half-load option by pushing the half-load button again until the corresponding indicator
goes off.
The program starts when you close the door.
'Programs'
.
'Delaying the program'
(Figure 15)
(Figure 16)
(Figure 17)
(Figure 18)
(Figure 19)
.
English • 43