Clock Functions - Electrolux EOC5644 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

12
www.electrolux.com

6. CLOCK FUNCTIONS

6.1 Clock functions table
Clock function
Press
switch between the clock
functions.
To confirm the settings of
the clock functions, press
or wait 5 seconds for an
automatic confirmation.
6.2 Setting the DURATION or
END
1. Set an oven function.
2. Press
display shows
or
3. Press
and press
For Duration
and then the hours, for End
set the hours and then the minutes.
An acoustic signal sounds for 2 minutes
after the time ends.
and time setting flash in the display. The
oven stops.
4. Press any button to stop the acoustic
signal.
TIME OF DAY
MINUTE MINDER Use to set a countdown time (maximum 23 h 59
DURATION
END
again and again to
again and again until the
or
.
flashes in the display.
or
to the set the values
to confirm.
first you set the minutes
or
Application
To set, change or check the time of day. Refer to
"Setting the time".
min). This function has no effect on the operation of
the appliance. You can set the MINUTE MINDER at
any time, also if the appliance is off.
To set how long the appliance operates. Use only
when an oven function is set.
To set when the appliance must deactivate. Use on‐
ly when an oven function is set. You can use Dura‐
tion and End at the same time (time delay), if the ap‐
pliance is to be activate and deactivate automatical‐
ly later.
5. Turn the knob for the oven functions
to the off position.
6.3 Setting the MINUTE
MINDER
1. Press
and "00" flash in the display.
2. Press
MINDER.
First you set the seconds, then the
minutes and then the hours.
At first, the time is calculated in
minutes and seconds. When the time
you set is longer than 60 minutes, the
first you
symbol
The appliance now calculates the time in
hours and minutes.
symbol
3. The MINUTE MINDER starts
automatically after five seconds.
After 90% of the set time, an acoustic
signal sounds.
If you press
when you set
the hours for DURATION
, the appliance goes to
setting of the END
function.
.
or
to set the MINUTE
comes on in the display.

Publicité

Chapitres

Table des Matières
loading

Table des Matières