Electrolux EOC5644 Notice D'utilisation page 31

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem
The display shows an error
code that is not in this ta‐
ble.
There is no good cooking
performance using the
True Fan Cooking PLUS
function.
There is no good cooking
performance using the
True Fan Cooking PLUS
function.
There is no good cooking
performance using the
True Fan Cooking PLUS
function.
You want to activate the
True Fan Cooking function,
but the indicator of the
Plus Steam button is on.
You want to activate the
cleaning function, but the
display shows "C4".
The water in the cavity em‐
bossment does not boil.
The water comes out of
the cavity embossment.
Possible cause
There is an electrical fault.
You did not activate the
True Fan Cooking PLUS
function.
You did not activate cor‐
rectly the True Fan Cook‐
ing PLUS function with the
Plus Steam button.
You did not fill the cavity
embossment with water.
The True Fan Cooking
PLUS function operates.
The Plus Steam button is
pressed in.
The temperature is too low. Set the temperature at
There is too much water in
the cavity embossment.
ENGLISH
Remedy
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
Refer to "Activating the
True Fan Cooking PLUS
function".
Refer to "Activating the
True Fan Cooking PLUS
function".
Refer to "Activating the
True Fan Cooking PLUS
function".
Push the Plus Steam but‐
ton
to stop the True
Fan Cooking PLUS func‐
tion.
Press the Plus Steam but‐
ton again.
least to 110 °C.
Refer to "Hints and tips"
chapter.
Deactivate the oven and
make sure that the appli‐
ance is cold. Wipe the wa‐
ter with a cloth or sponge.
Add the correct amount of
water to the cavity em‐
bossment. Refer to the
specific procedure.
31

Publicité

Chapitres

Table des Matières
loading

Table des Matières