Clock Functions; Count Up Timer; Setting The Duration - Electrolux EEC5700 Notice D'utilisation

12 www.electrolux.com

7. CLOCK FUNCTIONS

SYMBOL
TIME OF DAY

7.1 Count Up Timer

Use the Count Up Timer to monitor how
long the appliance operates. It is on im-
mediately when the appliance starts to
heat.
Reset the Count Up Timer: touch
and at the same time until the display
shows "00:00" and the Count Up Timer
starts to count up again.
You cannot use the Count Up
Timer when Duration or End is
set.

7.2 Setting the DURATION

1. Activate the appliance and set an
oven function and temperature.
2.
Touch again and again until the
display shows
display.
3.
Use or
DURATION.
4.
Touch to confirm.
5.
Use or
DURATION.
If you touch
set the DURATION, the appliance
switches to the setting of the END
function.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the dis-
play. The appliance deactivates.
Touch a sensor field to stop the
acoustic signal.
7. Deactivate the appliance.
All manuals and user guides at all-guides.com
FUNCTION
To examine the time of day. For changing the
time of day refer to 'Setting and changing the
DURATION To set how long the appliance operates.
END To set when the appliance deactivates. You can
use the Duration and End functions at the same
time (Time delay), if the appliance is to be acti-
vated and deactivated automatically later.
7.3 Setting the END
1.
2.
3.
4.
5.
6.
. flashes in the
7.4 Check result (selected
models only)
to set the minutes for
If you set the END or DURATION function,
two minutes before the end of cooking an
acoustic signal sounds and the lamp acti-
to set the hours for
vates. The appliance goes to the setting
of the END or DURATION function. During
or while you
these two minutes you can examine the
results of the cooking, and, if necessary,
add the END or DURATION time.
7.5 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a count-
down (maximum 2 h 30 min). This func-
tion has no effect on the operation of the
oven. You can set the MINUTE MINDER
DESCRIPTION
time'.
Activate the appliance and set an
oven function and temperature.
Touch again and again until the
display shows . flashes in the
display.
Use or to set the END (first
you set the minutes and then the
hours) and or to confirm.
When the set time ends, an acoustic
signal sounds for two minutes.
symbol and the time setting flash
in the display. The appliance deacti-
vates.
Touch a sensor field to stop the
acoustic signal.
Deactivate the appliance.