Troubleshooting Guide - EINHELL GC-SC 2240 P Mode D'emploi D'origine

9. Troubleshooting guide

Fault
The motor does not
start
Engine does not run
smoothly
The equipment
does not operate
smoothly and vibra-
tes intensively
Motor is running,
roller is not rotating
Anl_GC_SC_2240_P_SPK7.indb 24 Anl_GC_SC_2240_P_SPK7.indb 24
GB
Possible causes
- Engine brake lever not pressed
- Spark plug defective
- Fuel tank empty
- Petrol cock closed
- Air fi lter dirty
- Spark plug worn
- Choke open
- Blades imbalanced
- V-belt torn
- 24 -
Remedy
- Press the engine brake lever
- Replace spark plug
- Top up fuel
- Open petrol cock
- Clean the air fi lter
- Clean/Replace the spark plug
- Set choke lever to "Run" position
- Have the blades replaced by a cus-
tomer service workshop.
- Have the V-belt replaced by a cus-
tomer service workshop.
08.10.14 09:01 08.10.14 09:01