Roland KR103 Mode D'emploi page 40

KR103 Digital Intelligent Piano
Performance functions and effects
FilToVar The pedal has the same function as the
[To¥Variation] button.
FilToVOr The pedal has the same function as the
[To¥Original] button.
Fill This inserts a Fill-in, but the accompani-
ment pattern afterward does not
change.
Orig-Var This changes to Original or Variation
without inserting a Fill-in.
Intro/End If the Arranger is not running, pressing
the assigned pedal prepares the Intro
pattern of the selected Style, which will
be played back as soon as you press the
[Start÷Stop] button.
If the Arranger is running while you
press the assigned pedal, the KR103
switches to the Ending pattern on the
next downbeat and stops as soon as it is
finished.
Start/Stop The pedal has the same function as the
[Start÷Stop] button.
OrchestrUp The pedal allows you to select the next
Style Orchestrator level (i.e. "Advanced"
if "Basic" is currently selected). After
selecting "Full", however, you will not
return to "Basic" when you press the
pedal again.
OrcheDown The pedal allows you to select the pre-
ceding Style Orchestrator level (i.e.
"Basic" if "Advanced" is currently
selected). After selecting "Basic", how-
ever, you will not return to "Full" when
you press the pedal again.
MelInt On/Off The pedal has the same function as the
[Melody¥Intelligence] button.
Fade This function allows you to fade in (the
volume gradually increases) when the
Arranger is started, or to fade out
(whereby the volume gradually
decreases) if the Arranger is running
while you press the pedal.
RotSlow/Fast Allows you to select the slow or fast
speed of the Rotary effect. This only
works, if the "Rotary" type is assigned to
the MFX (see p. 39).
Play/Stop The pedal has the same function as the
[Play÷Stop¥®÷ª] button.
PunchI/O The pedal can be used to activate and
switch off punch in/out recording (see
p. 32).
TapTempo The pedal allows you to specify the
desired Style or song tempo simply by
pressing it several times at the corre-
sponding speed.
38
Soft In this case, the pedal functions as soft
pedal (a pedal found on grand and digi-
tal pianos that reduces the volume).
Note: This function only applies to the
Keyboard parts.
Sostenut In this case, the pedal functions as Sos-
tenuto pedal (another pedal found on
grand and digital pianos that allows you
to sustain only those notes you played
at the time you pressed the pedal).
Note: This function only applies to the
Keyboard parts.
Lwr Damper The assigned pedal acts as damper pedal
for the Lower part.
Note: The left or central pedal only uses the assigned func-
tion if you do not press the [Piano] button afterwards, and
if the PDLSHIFT parameter page 47 is set to "Off".
(4) Press the [Exit] button to leave this function.
Note: This setting can be saved to a User Program (see p. 46).