Using The Style Orchestrator Function - Roland KR103 Mode D'emploi

page de 184

/ 184
Matières
Table des Matières
Signets

Table des Matières

Les langues disponibles

Selecting a Style on floppy disk

Here is how to select a Style on the floppy disk in the

KR103's drive:

(1) Insert the floppy disk with the desired Style into

the KR103's drive.

(2) Press the Music Style [Trad÷Kids] button.

(3) Press the [®] button until the display shows the

name of the first Style on the inserted floppy disk:

POP 1

The name is preceded by a "D" and a number.

Note: If you forgot to insert a floppy disk into the drive,

the display shows "No Disk" when you attempt to

select the "disk family" and keeps using the previously

selected Style.

(4) Use the [+][–] buttons to select the Style you want

to load.

(5) Confirm your selection by pressing the [Enter] but-

ton.

The display briefly shows "Loading" and the

icon flashes. The selected Style is copied to the USR

memory and that memory is selected.

(6) Press the [Start÷Stop] button to start Arranger play-

back (if it is not running yet).

Note: To return to the last Style you loaded from floppy disk,

there is no need to load it again. Just press the [®] button until

the name of that Style appears in the display.

Note: The USR memory is erased when you switch off the

KR103.

Using the Style Orchestrator

function

The Style Orchestrator function allows you to vary

the accompaniment patterns played by the Arranger.

You can leave out parts, thin out the drum part, etc.

– in real-time (i.e. while you are playing).

(1) Press the [Arranger] button to select the Arranger

mode.

Ent

(2) Select the Music Style you wish to use for playing

(or use the one that is currently selected).

See page 18.

(3) Press one of the following buttons to select the

desired level of musical "complexity" (the corre-

sponding icon is displayed):

Reverb

Demo

User Program

Obviously, these buttons should be used during

Arranger playback to further refine the automatic

accompaniment.

Exit

Enter

Basic

Advanced

Full

The assigned icon appears in the display (only one of

them can be displayed at any one time).

Note: The effect of these three levels also depends on

whether the [To¥Variation] or [To¥Original] button was

pressed. In effect, the combination of the [To¥Original]/

[To¥Variation] and [Basic]/[Advanced]/[Full] buttons provides

6 accompaniment patterns per Music Style (3 x 2).

Note: Immediately after switching on the KR103, the Arranger

selects the "Full" level.

Note: The last selection you make can be saved to a User

Program. See p. 46.

KR103 Digital Intelligent Piano