Use And Cleaning Information; Control Descriptions; Recommendations For Use; Warming Surfaces With Infrared Lamps Use - Bartscher PCI/4711 Manuel D'emploi Et D'entretien

Control descriptions

-
Indicator light (B)
-
Adjustable thermostat 0°- 90°C (C)
-
Loaded circuit breaker (A) with tension led
-
Power cord inlet (D) + cord

Recommendations for use

Before using the machine remove, if found, the special protective film.
Unpleasant odours produced during the first minutes of operation are due to the presence of processing
grease residues.
On first use, heat the machine to the maximum temperature.

Warming surfaces with infrared lamps use

Connect the power cord to the main switch and turn the thermostat graduated knob to set the desired
temperature. The led will stay on until the surface reaches the previously set temperature.

End of the day cleaning

•
Remove the plug from the electrical socket at the end of the day.
•
Accurately clean using neutral products.
•
Clean external machine parts with a damp sponge when the machine is fully cooled.
•
Do not use metallic pads and abrasive detergents.
•
To avoid hazards caused by contact with high temperature parts, only access heating parts after
maintenance operations have been completed.

Extended periods of disuse

For extended periods of disuse, turn off the main wall switch, clean the machine and cover it with a cloth to
protect if from dust.
USE AND CLEANING
INFORMATION
8
3