Configuration - ZUMEX ESSENTIAL BASIC Manuel De L'utilisateur

Selection of the operating mode:
1 Press the MENU key for a few seconds to enter the menu.
2
Select the WORKING MODE option by positioning the cursors
to confirm your selection.
3
Select the desired working mode, Professional or Self-Service using the cursors
and pressing ON to confirm your selection. Press OFF several times until you exit MENU.

CONFIGURATION

Your Zumex juicer allows you to adjust the parameters according to your preferences. All
adjustments are made at MENU > CONFIGURATION. Press the MENU key for a few seconds
to enter the menu and select CONFIGURATION, press ON to confirm your selection.
LIGHTING: Changes the screen brightness level.
On the CONFIGURATION menu select LIGHTING and press ON to confirm your selection.
Adjust the brightness level using the cursors
ON. The changes will be memorised.
LANGUAGE: Changes the juicer menu language.
On the CONFIGURATION menu select LANGUAGE and press ON to confirm your selec-
tion. Select the language desired using the cursors
pressing ON. The changes will be memorised.
OFFSET: Depending on the type of fruit to be squeezed, the value can be adjusted for
its optimum counting.
Select OFFSET and press the ON key and you will be immediately asked for your PIN.
If you don't have one, consult your Technical Service. Then you configure the desired
number using the cursors
save the changes. This operation must only be carried out under the supervision of an
authorised Technical Service.
NOTE: Remember that if you press OFF, you will cancel any changes
made before and you will return to the previous menu.
. Once adjusted, confirm by pressing
. Once the adjustment has been concluded, press ON to
and pressing ON
. Once selected confirm by
45