ZUMEX ESSENTIAL BASIC Manuel De L'utilisateur page 48

Calibrate: Select CALIBRATE and press ON. Next, set your PIN number and press
ON. The machine will ask for confirmation: 'Calibrate?', press 'ON' to confirm the
automatic calibration. The machine will then carry out said calibration and display
the adjusted calibration value. Return to the menu, pressing OFF.
This option must only be carried out under the supervision of the Technical Service
and when it has been specifically indicated.
PIN: Your juicer has a password so you can access the counters and modify configu-
ration parameters. The standard programmed PIN is 0000 but you can personalise
this PIN. On the TECHNICAL SERVICE menu select PIN and press ON to confirm your
selection. If this is the first time you have changed your PIN, the standard PIN 0000 will
appear and press ON; if you have already programmed a password previously, enter
the old password, use the cursors
digit to digit and ON to confirm the password. Upon entering the correct PIN the "New
PIN" screen will appear. Programme the new password, select each digit with the
cursors , press OFF to move from digit to digit and ON to confirm the new PIN.
If you forget the Pin number programed, you will be required to reset machine's
MENU. In order, to do that, enter CONFIGURATION press
press button simultaneously.
COUNTERS: You can control the counter and discounter of your juicer. The counter
allows you to establish the no. of oranges squeezed, the discounter function allows
you to programme a given no. of oranges and gradually consume oranges from this
total.
Partial counter: This shows you the no. of oranges consumed and it can be set to
zero. On the TECHNICAL SERVICE menu select COUNTERS > PARTIAL COUNTER and
press ON to confirm your selection. Enter your PIN (Remember: Select each digit
with the cursor
password). You can view the number of oranges squeezed on the screen. To set the
counter to zero press
will see that the counter has been set to zero. Return to the menu, pressing OFF
repeatedly.
to select each digit, press OFF to move from
, press OFF to move from digit to digit and ON to confirm the
and confirm using ON and on the machine display you
button, and while pressed,
47