ZUMEX ESSENTIAL BASIC Manuel De L'utilisateur page 45

When you turn on the machine for the first time after purchase, a message will appear:
"Select language" in order to select the operating language of the machine.
The choice can be made using the arrows
machine will be ready for operation in "Self-Service" mode.
As a general rule, to operate within the menu, we can regard the "ON" button as accept
and "OFF" as cancel.
OPERATING MODES WITH ZUMEX ESSENTIAL PRO
Zumex Essential Pro can work in two operating modes:
Autostart: The machine detects the oranges in the feeder tube and starts up as the
oranges pass by.
Self-service: The machine starts up by activating the self-service faucet either by
pressing the faucet or by activating the switch lever; in order to be able to operate
with this switch lever see Fig. 9A and 9B. In this mode you can also work continuously
by turning the faucet block 90º (Fig. 13).
Selection of operating mode:
1
Press the MENU key for a few seconds to enter the programming mode.
2
Select the WORKING MODE option by positioning the cursors
pressing ON to confirm your selection.
3
Select the desired working mode, Autostart or Self-Service using the cursors
press on to confirm your selection. Press OFF several times until you exit MENU.
OPERATING MODES WITH ZUMEX VERSATILE PRO
Zumex Versatile can operate in two working modes:
Professional: You can programme the no. of oranges to be squeezed in each cycle
using the cursors
the 'c' option to squeeze continuously. The squeezing will start by pressing 'ON' and it
will end after ceasing to squeeze the no. of oranges programmed or if you press 'OFF'.
Self-service: The machine starts up by activating the self-service faucet either by
pressing the faucet or activating the switch lever. You can also work continuously in
this mode by turning the faucet block 90º (Fig. 13).
, and you can programme up to 20 oranges in each cycle or select
and pressing "ON". Once selected, the
over it and
and