Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en-US
Frequently Asked Questions
With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department.
This guide may help you to find the reason for the fault, and how to correct it.
Problem
The vacuum cleaner
turns off automatically.
24
Possible cause and solution
A temperature limiter turns the vacuum cleaner off au-
tomatically if it gets too hot.
This can occur if, for instance, large articles block the
wand or when the FilterBag is full or contains parti-
cles of fine dust. A heavily soiled exhaust or dust
compartment filter can also be the cause of overheat-
ing.
Turn the vacuum cleaner off immediately using the
On/Off foot switch , and unplug it.
After removing the cause, wait for approximately 20 -
30 minutes to allow the vacuum cleaner to cool down.
It can then be turned on again.
Publicité
Chapitres
Table des Matières
