Cattani Maxi-Smart Manuel D'utilisation page 57

• Important warnings
• Transport and storage
• Transport of used equipment
• Important warnings
• The units are covered by a warranty for one year from the date of sale, provided the warranty
tag is completed with the following information and returned to the manufacturer: date of sale,
name of seller and user.
• Purchase of a special kit of cleaning and disinfection products will entitle the buyer to a 12
month warranty extension.
• The warranty and manufacturer's liability shall cease to apply if the equipment is serviced with
unsuitable products or products other than those indicated by the manufacturer, used incorrectly
or if the equipment is tampered with in any way by persons not authorized by the manufactured.
• The manufacturer, dealers, agents and authorized technicians are available for advice,
suggestions and to provide documentation, spare parts and anything else you may need.
• The manufacturers may decide to introduce changes in the products without notice due to
technical needs, product improvement programmes, regulatory or functional problems, diffi culty
in sourcing parts or semi-fi nished products.
Updated handbooks are available through our website www.cattani.it. We strongly recommend
you refer to the updated information on safety issues
• Transport and storage
• During transport and storage, the packed units can withstand temperatures from -10 °C to +
60 °C.
• The packed units should not be exposed to water and splashing and cannot withstand humidity
above 70%.
• Packs may be stacked only to three layers with packs of the same weight.
• Transport of used equipment
• Before packing, you should clean and disinfect the aspirator with Fast & Steril 3 (see chapters
on "Signs and warnings" and "Regular maintenance").
• Drain all pipes and outside/inside communications as liquid residues (even disinfectant) could
damage the control unit. Remove the amalgam retention vessel, add the disinfectant, close
the vessel with the tight cover. Dry the aspirator inside and outside, close all outside/inside
communications with the stoppers provided, install a new amalgam retention vessel, wrap the
aspirator and the control unit separately, to ensure maximum water tightness.
• Wrap the unit with polyethylene and pack using the original wood frame (if unavailable, obtain
an original frame from the manufacturer)
• Secure the machine to the frame using brackets.
55