Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Voice Messages Management
The BTEL-3G can record up to 8 voice messages lasting up to 8 seconds each; up to 3 messages can also be linked
consecutively so as to create more complex messages.
Listen to Voice Messagge
To listen to a voice message, type the following keypad sequence:
where <Voice Message no.> is a number from
If you want to stop the message before it ends, press the
Record Voice Message
To record a voice message, type the following keypad sequence:
where <Voice Message no.> is a number from
1. Keep the
key pressed and record the message. Release the
to 8 seconds).
From this moment on, any previous recording made for this message number is ERASED.
2. If you wish, you can record other messages by repeating the procedure from step 1.
To stop recording messages press the
Management Options Calls
Settings for voice calls can be inputted in this section. The dialler is provided from the factory without any programmed
telephone numbers.
Call Handling on Input
When the input is activated, the BTEL-3G can send voice messages to up to 9 telephone numbers. In this section, you can link the
inputs to the phone numbers to call and the voice messages to send. Input no. 4 (L4) can be programmed to perform the "Block
Calls" function (which blocks call cycles and the sending of text messages) instead of making calls triggered by input. To program,
type the following keypad sequence:
where:
<Input no.> is the number of the input being programmed (from
<Telephone Number> is the position of the phone number to call (from
specify the position(s) of the phone number(s). For example, if you want the dialer to call the 3rd, 4th, and 7th
phone numbers, type
On input no. 4 (L4), by pressing the
you can enable call blocking. By pressing the
any confirmation messages.
<Voice Message no.> corresponds to the number of the voice messages to be assigned (from
messages can be chosen (for example, messages
) will be ignored.
The messages chosen will be played in increasing numerical order: for example if
messages 2, 3, and 1 are selected, they will play in the order 1 - 2 - 3.
A <Voice message> will be sent only if all the messages in it are valid (i.e. not empty).
If the
key is pressed (see the paragraph "Programming by Keypad") during programming, the data
entered will be disregarded and the previous data will be kept.
3G/2G Telephone dialler
<Voice Message no.>
to
.
<Voice Message no.>
to
.
key.
<Input no.><Telephone Number>
followed by the
key to confirm. To disable this feature, press the
key instead of typing the position of a phone number,
key you return to the previous menu directly without
key.
key to end recording (the message can last up
<Voice Message no.>
to
);
to
). Type one or more digits to
); any surplus or repeated numbers (for example
EN
key.
to
). Up to 3 voice
13
Publicité
Chapitres
Table des Matières
