Using The Wireless Remote Control - DeWalt DW077 Guide D'utilisation

Masquer les pouces Voir aussi pour DW077:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DANGER: NEVER STARE DIRECTLY INTO THE LASER
BEAM, WITH OR WITHOUT THESE GLASSES.
Target Card
The D
WALT Rotary Laser Kit includes a Laser
E
Target Card to aid in locating and marking the laser
beam. The target card enhances the visibility of the
laser beam as the beam crosses over the card.
The card is marked with standard and metric
scales. The laser beam passes through the red
plastic and reflects off of the reflective tape on the
reverse side. The magnets at the top of the card
are designed to hold the target card to ceiling track
or steel studs to determine plumb and level positions. For best per-
formance when using the Target Card, the D
facing you.

Using the Wireless Remote Control

The remote control allows one person to
operate and setup the laser from a distance.
The remote control features a speed/rotation
button, a scan mode button, and four arrows
pointing left, right, up, and down. The
speed/rotation and scan mode buttons operate
in exactly the same way as the speed/rotation
and scan mode buttons on the lasers control
panel. The arrow buttons operate differently
depending on whether the laser is set up in
plumb or level mode
In plumb (vertical) mode, the left and right buttons can be used to
rotate the plane of laser light left and right. The up and down
buttons operate only when the laser is in dot mode (0 rpm's) or in
scan mode. When the laser is in dot mode, the up and down but-
tons are used to rotate the rotary head and therefore move the dot
up and down. When in scan mode, the up and down buttons move
the scan area up and down.
WALT logo should be
E
In level (horizontal) mode, the left and right buttons operate only
when the laser is in dot or scan mode. In dot mode the left and right
buttons rotate the rotary head and therefore move the dot left and
right. In scan mode the left and right buttons rotate the scan area
left and right. The up and down buttons operate the laser only when
in scan mode. The up button makes the scan area larger, and the
down button makes the scan area smaller.
Digital Laser Detector: DW0772
Some laser kits unclude a D
D
WALT digital laser detector allows you to locate a laser beam
E
emitted by a rotary laser in bright light conditions or over long dis-
tances. The detector can be used in both indoor and outdoor situ-
ations where it is difficult to see the laser beam. The detector is not
11
G
A
B
C
D
H
E
F
WALT digital laser detector. The
E

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dw077kd

Table des Matières