Preparing The Connection To The Flue - Dovre ASTRO 3MFP Installation Et Mode D'emploi

Preparing the connection to
the flue
When connecting the stove to the flue, you can
choose to connect to the top or rear of the stove.
When the appliance is delivered, the
connection on the rear is left open.
Plug the outlet you don't wish to use with the
corresponding supplied cover.
Install the supplied corresponding connection collar
to the outlet you wish to use.
Sealant and materials are supplied.
1 Connection - top
2 Connection - rear
8
Connect to top
1. Remove the top plate.
The top plate can be taken off the appliance
just like that.
2. At the outlet at the top, apply sealant to the
contact surface where the connection collar will be
positioned.
3. Install the connection collar with the materials.
4. At the outlet at the rear, apply sealant to the
contact surface where the cover will be
positioned.
5. Install the cover using the materials.
Subject to change because of technical improvements