WANDERS Larix Mode D'emploi Et Instructions D'installation page 31

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Placing the log set
The log set can be placed after opening the door as described on page 29.
Overview logs and decoration
Layout log set
01 -  (1 x L, 1 x R)
03 - 
05 - 
08 - 
Place the logs according to the images corresponding with your fi replace.
The logs needs to be placed exactly according to the examples.
Ensure that the pilot fl ame is always free of obstructions so it can lit the main burner properly.
Ensure the the glass is fi tted before lighting the fi replace.
When using propane be sure to place NO decoration on the burner.
When arranging the media in the fi re, it is always important to keep the mainburner (MAIN) clear from media
unless otherwise instructed. The main burner needs to have an uninterupted connection with the pilot burner
(PILOT) and with with logs of the eff ectburner that are connected to burner port 1 and 2 (BP 1 and BP 2)
When using propane make sure there is no decoration on the burner.
Please make sure not to touch the glass with your fi ngers. Finger marks burn in the glass.
It is prohibited to add any extra ceramic (wooden) logs or other materials to the log set. Using vermiculite
granules on the MAIN burner is prohibited. It will prevent the hearth from working properly and can damage the
hearth beyond repair. Replace the ceramic wooden logs only by the same kind of logs produced by WANDERS.
04 - 
06 - 
09 - 
02 - 
07 - 
10 - 
GB
31

Publicité

Table des Matières
loading

Table des Matières