Hach TL2310 Manuel D'utilisation De Base page 6

residential area is likely to cause harmful interference, in which case the user will be required to
correct the interference at their expense. The following techniques can be used to reduce
interference problems:
1. Disconnect the equipment from its power source to verify that it is or is not the source of the
interference.
2. If the equipment is connected to the same outlet as the device experiencing interference, connect
the equipment to a different outlet.
3. Move the equipment away from the device receiving the interference.
4. Reposition the receiving antenna for the device receiving the interference.
5. Try combinations of the above.
2.2.4 Korean certification
업무용을 위한 EMC 등급 A 장치에 대한
사용자 지침
사용자안내문
A 급 기기 ( 업무용 방송통신기자재 )
이 기기는 업무용 (A 급 ) 전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며 , 가정
외의 지역에서 사용하는 것을 목적으로 합니다.
2.3 Product overview
Fire hazard. This product is not designed for use with flammable liquids.
The TL2310 laboratory turbidimeter measures the scattered light from water samples to determine
the turbidity value of the samples. The instrument uses one detector at a 90-degree angle from the
light source. The user can calibrate the instrument and verify the calibration at regular intervals.
The user interface uses a touch screen display. A Seiko DPU-S445 printer, USB flash drive or
keyboard can connect to the USB ports. Refer to
time-date stamp on all of the data that is transmitted or recorded (i.e., reading log, calibration log and
verification log).
6 English
C A U T I O N
Figure 1. The real-time clock with battery puts a