Hach TL2310 Manuel D'utilisation De Base page 10

Icon Description
Starts a calibration.
Calibration
Starts a verification.
Verification
Shows the reading log, calibration log and verification log. Refer to
recorded data
Data Log
Configures the instrument settings. Refer to
on page 11.
Setup
Shows the firmware information, instrument backup, instrument updates, signaling
information and factory service data.
Diagnostics
Sets a timer.
Timer
Section 5 Startup
Infrared Light Hazard. The infrared light produced by this instrument can cause eye injury. The
infrared light source in this instrument only receives power when the sample cell cover is closed.
Refer to the illustrated steps that follow to supply power to the instrument and start the instrument.
The self-check will start.
10 English
Table 1 Sidebar menu icons (continued)
on page 19.
C A U T I O N
Configure the instrument settings
Show the