Bartscher SUSHI BAR 5 X 1/2 GN Mode D'emploi page 29

LED indicators
LED cooling indicator
This indicator comes on when the compressor is activated,
goes off when the desired internal temperature is reached
and flashes during delays.
LED defrost indicator
This indicator comes on during the defrost process,
goes off when the defrost process is finished and flashes during
extended defrost.
Setting the desired temperature (desired value)
•
The device's temperature can be set within a range from 2 ° C to 7 ° C.
•
To set or change the desired value:
press the button labeled
raise or lower the temperature as desired by pressing the buttons labeled
and
confirm the set temperature by pressing the button labeled
Turning lighting on/off
•
LED internal lighting can be turned on as needed by pressing the button labeled
.
•
To turn the lighting off, press the button labeled
Automatic defrost
The device has an automatic defrost function. It is optimally set to cool sushi, tapas, etc.
Cooling food products
•
When the device's interior has reached the desired temperature, the LED cooling
indicator will go off and the device is ready for food products to be placed inside. To do
this, first open the glass door at the rear of the device.
•
Food products (e.g. sushi, tapas) ready to be served should be placed in appropriate
GN containers, which are then placed in the cooling cabinet.
- 28 -
;
the current value will begin flashing
;
;
.
again.