Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
About the controls on the refrigerator.
8
What the Codes Mean
Check your frozen food. Has any of it started to thaw? A package may be holding the freezer
compartment door open. Don't open the door more often than absolutely necessary while
this code is displayed. Touching SYSTEM CHECK-RESET after the freezer compartment
temperature has returned to normal will erase the code.
Power to the refrigerator has been interrupted for more than two seconds. Check the condition
of food in both the fresh food and freezer compartments. Touch SYSTEM CHECK-RESET
to erase the code.
There is no fault with the refrigerator when the PF code flashes.
Check the icemaker. Ice clumps in the storage bin may have stalled the icemaker. Follow
corrective measures described in Troubleshooting Tips. If water supply to the icemaker is
not connected or not turned on, make sure the icemaker feeler arm is in the STOP (up)
position. The code stops flashing when problem is corrected or SYSTEM CHECK-RESET
is touched.
Something is wrong with the defrost system—keep doors closed to retain cold and call for
service. The code flashes until problem is corrected.
Publicité
Chapitres
Table des Matières
Dépannage
