GE 162D9617P005 Manuel D'utilisation page 20

Preparing to install the refrigerator.
Door Alignment
After leveling, make sure that doors are even at the top.
To make the doors even, adjust the fresh food door. Insert a 3/16² Allen wrench into the bottom of the
hinge pin. Turn the door adjusting screw to the right to raise the door, to the left to lower it. (A nylon plug,
imbedded in the threads of the pin, prevents the pin from turning unless a wrench is used.) After one or two
turns of the wrench, open and close the fresh food door and check the alignment at the top of the doors.
Dimensions and Specifications
20
Make sure doors
are even at the top.
3/16² Allen Wrench
(for Built-In Style models)
²
70 1 /
4
36²
24²
Uneven Doors
Hinge Pin
Raise
Water
3/4² Airspace
(1/2² Gap + 1/4²
Wall Plates)
24² Cabinet
24² Side Panels
Electrical
25²
Counter Top