Specific Safety Rules And Symbols - Hitachi DH 28PC Mode D'emploi Et Instructions De Securite

f) Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less
likely to bind and are easier to
control.
g) Use the power tool, accessories and
tool bits etc. in accordance with
these instructions, taking into
account the working conditions and
the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
5) Service
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts.
This will ensure that the safety of the
power tool is maintained.

SPECIFIC SAFETY RULES AND SYMBOLS

1. Hold tools by insulated gripping
surfaces when performing an operation
where the cutting tool may contact
hidden wiring or its own cord. Contact
with a "live" wire will make exposed
metal parts of the tool "live" and shock
the operator.
2. ALWAYS wear ear protectors when
using the tool for extended periods.
Prolonged exposure to high
intensity noise can cause hearing
loss.
3. NEVER touch the tool bit with bare
hands after operation.
4. NEVER wear gloves made from
materials likely to roll up such as cotton,
wool, cloth or string, etc.
5. ALWAYS attach the side handle and
securely grip the Rotary Hammer.
6. NEVER touch moving parts.
NEVER place your hands, fingers or
other body parts near the tool's moving
parts.
7. NEVER operate without all guards in
place.
NEVER operate this tool without all
guards or safety features in place and
in proper working order. If maintenance
or servicing requires the removal of a
guard or safety feature, be sure to
replace the guard or safety feature
before resuming operation of the tool.
8. Use right tool.
Don't force small tool or attachment to
do the job of a heavy-duty tool.
Don't use tool for purpose not intended
—for example— don't use circular saw
for cutting tree limbs or logs.
9. NEVER use a power tool for applications
other than those specified.
NEVER use a power tool for applications
other than those specified in the
Instruction Manual.
10. Handle tool correctly.
Operate the tool according to the
instructions provided herein. Do not
drop or throw the tool. NEVER allow the
tool to be operated by children,
individuals unfamiliar with its operation
or unauthorized personnel.
11. Keep all screws, bolts and covers tightly
in place.
Keep all screws, bolts, and plates tightly
mounted. Check their condition periodically.
12. Do not use power tools if the plastic
housing or handle is cracked.
Cracks in the tool's housing or handle
can lead to electric shock. Such tools
should not be used until repaired.
13. Blades and accessories must be
securely mounted to the tool.
Prevent potential injuries to yourself or
others. Blades, cutting implements and
accessories which have been mounted
to the tool should be secure and tight.
14. Keep motor air vent clean.
The tool's motor air vent must be kept
clean so that air can freely flow at all
times. Check for dust build-up frequently.
English
5