Optional Accessories - Hitachi DH 28PC Mode D'emploi Et Instructions De Securite

English
OPTIONAL ACCESSORIES (sold separately)
1. Drilling anchor holes (Rotation + Hammering)
Drill Bit (Taper shank) and taper shank adaptor
(1) Drill Bit (Taper Shank)
External dia. Code No.
7/16"
944460
(11 mm)
1/2"
944461
(12.3 mm)
1/2"
993038
(12.7 mm)
9/16"
944462
(14.3 mm)
9/16"
944500
(14.5 mm)
11/16"
944463
(17.5 mm)
7/8"
944464
(21.5 mm)
2. Knock-in anchor (Hammering only)
Anchor Setter (for anchor
setting) (SDS-plus shank)
<Outer wedge type with the female screw>
Anchor size
Overall Length
Code No.
18
(2) Taper Shank Adaptor
(SDS-plus shank)
Cotter (Code No. 944477)
Taper mode
Morse taper
(No. 1)
Morse taper
(No. 2)
A-taper
B-taper
W 1/4" W 5/16"
(6.3 mm) (8 mm)
10-1/4" 10-1/4"
(260 mm) (260 mm)
302976 302975
Code No. Applicable drill bit
Drill bit
303617
(Taper
shank)
Drill bit
303618
(Taper
shank)
Taper shank adaptor formed A-
303619
taper or B-taper is provided as an
optional accessory, but drill bit for
303620
it is not provided.
6-1/4"
(160 mm)
303621
7/16" (11 mm)
1/2" (12.3 mm)
1/2" (12.7 mm)
9/16" (14.3 mm)
9/16" (14.5 mm)
11/16" (17.5 mm)
7/8" (21.5 mm)
W 3/8"
(9.5 mm)
10-1/4"
(260 mm)
302974