Hitachi DH 28PC Mode D'emploi Et Instructions De Securite page 21

7. Bolt placing operation with Chemical Anchor. (Hammering only)
Standard socket
(on the market )
8. Drilling holes and driving screws (Rotation only)
Drill chuck, chuck adaptor and chuck wrench
Special screw
Code No. 981122
9. Driving Screws (Rotation only)
Phillips Driver Bit
Bit No.
No.2 1/8" – 3/16" (3 – 5 mm)
No.3 1/4" – 5/16" (6 – 8 mm)
10. Dust cup, Dust collector (B)
Dust cup
Code No. 971787
11. Hammer grease A
1.1 lbs (500 g) (in a can) Code No. 980927
0.15 lbs (70 g) (in a green tube) Code No. 308471
0.07 lbs (30 g) (in a green tube) Code No. 981840
NOTE:
Specifications are subject to change without any obligation on the part of the HITACHI.
(SDS-plus shank)
1/2" (12.7 mm) Chemical
Anchor Adapter
(Code No.303044)
3/4" (19 mm) Chemical
Anchor Adapter
(Code No. 303045)
Drill chuck (13VLRB–D)
(includes chuck wrench)
Code No. 321814
Chuck wrench
Chuck adaptor (D)
Bit No.
(SDS-plus shank)
Code No. 303624
Screw Size
Dust collector (B)
Code No. 306885
Chuck adaptor G
(SDS-plus shank)
Code No. 303623
Length
1" (25 mm)
1" (25 mm)
English
Code No.
971511Z
971512Z
21