Additional Components; Static Alignment; Dynamic Alignment - Blatchford Navigator NAV22LWW Instructions D'utilisation

6 Alignment
½
*
1/3
Approx.
Load Line
½
2/3

Additional components

Follow the alignment instructions that are
supplied with any additional components.

Static alignment

Sagittal plane
With the flexion accommodated, the load line
should pass through the center of the socket
and through the center of the pyramid.
Make sure that, when the user is standing, the
heel and the toe are evenly loaded and the
foot is in full contact with the floor.

Dynamic alignment

Coronal plane
Minimise M–L thrust by adjusting the relative
positions of the socket and the foot .
Sagittal plane
Make sure that the user transitions smoothly
from heel strike to toe-off.
*
Accommodate the heel height of the
user's footwear
6
938247/8-1019