Installation; Display Dimensions; Display Connector; Technical Data - Webasto Cool Top 110 RT-C Notice D'utilisation

7

Installation

Find the right place in the drivers cabin where the display will fit.
ATTENTION
Wrong chosen location for cut-out
Result: Damage of wiring and or components behind
the panel.
Check space behind panel before making the
X
cut-out.
7.1

Display dimensions

138 mm / 5,43"
112 mm / 4,41"
Fig. 03: Display dimension
Location for control panel has been checked
3
Make a cut-out of 112 mm wide and 55 mm high.
X
7.2

Display connector

13
15
Fig. 04: 6 pin connector
Pin Remark
1 --
2 --
3 --
4 --
5 --
6 GND
7 +12 VDC / +24 VDC
8 CAN L
9 CAN H
10 --
11 --
12 --
13 --
14 --
15 --
Tbl. 03: 6 pin connector, pin assignment
Cool Top
12 mm / 0,47"
14,6 mm / 0,57"
55 mm / 2,17"
68,2 mm /
2,685"
13 mm / 0,52"
1
3
Wire num-
Wire colour
ber
B-17 Black
027 Red
012 Green
013 Yellow
8

Technical data

Description
Operating voltage range [V]
Current consumption [mA]
Output short circuit protection
Polarity reverse protection
Operating temperature range [°C]
Temperature sensor
Protection IEC-60529 (front panel)
9 Technical support and
customer service
Do you have any technical questions or problem with the device?
National phone numbers of our representatives are provided on
the following website: www.webasto.com.
9.1

CE-Declaration of Conformity

Webasto hereby declares that the control element conforms
UNECE Regulation No. 10
The complete text of the CE-declaration of conformity is available
on the download area of https://dealers.webasto.com

10 Disposal

When you eventually decommission the system, please dispose of
the individual components properly at a recycling centre
Value
12-24
50
Protected
Protected
-40 to +80
NTC 10 kΩ @ 25 °C
IP54
8