Ventilation Speed Regulation; Manual Speed Regulation; Automatic Regulation; Recirculated Or Fresh Air Mode - Webasto Cool Top 110 RT-C Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

– The A/C runs at maximum heating capacity (Only if heating kit
is installed).
3.7

Ventilation speed regulation

There are two ventilation modes:

– Manual speed regulation

– Automatic regulation

3.7.1
Manual speed regulation
AUTO
AUTO
MENU
MENU
Press button "Blower" to switch to manual speed reg-
X
ulation.
– Ventilation back-light is on.
Press button "Up" to increase the ventilation speed.
X
Press button "Down" to decrease the ventilation
X
speed.
– Automatic speed regulation is disabled.
– The ventilation speed is fixed.
Cool Top
110/140/190/220 RT-C
190 RT-CW
250/300/360 RT-C
3.7.2
Automatic regulation
AUTO
Press button "AUTO" to switch to automatic speed
X
regulation.
– Ventilation back-light is off.
– The ventilation speed depends on the difference be-
tween temperature setting and the actual measured
temperature.
– The automatic regulation adjusts also the climate
control
3.8

Recirculated or fresh air mode

The fresh air mode is only available on systems with
fresh air kit installed.
The fresh air mode is optional. Contact Webasto.
Air is drawn in from the outside (fresh air mode) or recirculated in-
side (recirculated air mode).
AUTO
AUTO
MENU
MENU
Cool Top
Speed variations
S1, S2 and S3
S1, S2, S3, S4, S5 and S6
S1, S2, S3, S4, S5 and S6
Recirculation back-light is on.
3
Press button "Recirculation" to switch to recirculation
X
mode.
– Indicator lights green.
3.9

Climate control

There are two operation modes for climate control:

1. Manual cooling.

2. Automatic regulation.
"Heating" is only aivailable when a heating kit is in-
stalled. If no heating kit is installed the system only uses
the cool mode.
3.9.1
Manual cooling
AUTO
AUTO
MENU
MENU
Screen is on
3
Cooling indicator is off
3
Press button "Manual Cooling".
X
– Manual cooling indicator lights blue
– "AUTO" indicator is off
Screen is on
3
Cooling indicator lights blue
3
Press button "Manual Cooling" to switch off the A/C.
X
– Manual cooling indicator is off
3.9.2
Automatic regulation
The system controls the ventilation and, depending on the tem-
perature set-point, the system heats or cools the vehicle passenger
compartment.
Screen is on
AUTO
3
Press button "AUTO" to switch ON or OFF.
X
– Auto mode OFF: Indicator light is off.
– Auto mode ON: Indicator lights green.
The automatic regulation adjusts also the ventilation
speed.
5

Publicité

Table des Matières
loading

Table des Matières