About This Document; Purpose Of The Document; Using This Document; Use Of Symbols And Highlighting - Webasto Cool Top 110 RT-C Notice D'utilisation

1

About this document

1.1

Purpose of the document

The operating instructions are part of the product and provides
the user with information on the safe operation of the unit.
1.2

Using this document

Read these operating instructions before operating the unit.
X
Keep these operating instructions ready to hand.
X
Hand these operating instructions on to the following owner or
X
user of the unit.
1.3

Use of symbols and highlighting

Explanation
Action to be taken
Requirements for the following necessary action
Note on a special technical feature
Separate information is available
Possibility on property damage
Possibility on a severe or mortal injury
1.4

Warranty and liability

Webasto shall not assume liability for defects or damage that are
the result that the installation and operating instructions as well as
the instructions contained therein being disregarded.
This liability exclusion particularly applies for:
■ improper use
■ repairs not carried out by a Webasto service workshop
■ use of non-genuine parts
■ conversion of the unit without permission from Webasto
■ mechanical damage to the equipment
■ failure to comply with inspection and maintenance instructions
Cool Top
2

Safety

2.1

General safety

Please note that the configuration of the insulation/cooling affects
the storage capacity of the vehicle. When making use of the maxi-
mum storage capacity and the seats, also comply with the permis-
sible axle load.
2.2

Intended use

The control element is designed to control Webasto Cool Top
air conditioning systems for:
■ mini-bus
■ midi-bus
■ bus
ATTENTION
Misuse as a result of failure to comply with the
operating instructions
Result: damage to the A/C system
Follow the operating instructions.
X
The performance values of your application are closely
related to ambient conditions, vehicle insulation, etc.
The actual temperature may therefore deviate from the
set value.
The A/C system only operates with the vehicle engine
running.
In the case of vehicles fitted with automatic start-stop
control, the function must be switched off while ope-
rating the A/C system. For information on the control
and function of the automatic start-stop control, please
read the operating instructions for your vehicle.
3