Hendi 274125 Mode D'emploi page 8

1.2. Emptying the bowl
1.3. Removing the bowl
Warning: before removing the bowl, make sure that
the main switch is off and that the machine is un-
plugged from the mains electricity and sufficiently
cooled down
EN
8
Before cleaning out the bowl, it is first necessary to
empty out any production inside it.
With the machine switched on, empty out all of the
product still inside the bowl, using the level on the tap.
Fill the bowl with water and set temperature regu-
lator (7) to 50°C (122°F),Operate the appliance for
at least 15-20 minutes; increasing this amount of
time will release any product residues that may be
stuck to the sides of the bowl.
Empty out the entire contents of the bowl, using the
lever on the tap.
Warning: the product dispensed from the machine
has a very high temperature; risk of scalding.
Removing the bowl is prohibited if it contains the
product or any other liquid
It Is fundamentally important to remove the howl
and its component parts if the machines to be cor-
rectly cleaned and sainted.
To remove the bowl correctly proceed as follows:
• Take off the lid;
• Slide the mixer upwards to remove it, keeping it
in line with the central rod until the bottom slot of
the mixer itself is level with the rotation pin.