Hendi 274125 Mode D'emploi page 16

1.14. Resetting the temperature sensor
Note: There is a RESET button for the temperature
sensor inside.
Warning: after the temperature sensor has inter-
vened to shut down the machine, it is indispensable
to drain out any product contained inside the bowl
and to clean all components before restoring the
machine function.
EN
1.15. Periodic maintenance
The machine must be periodically checked (at least
once a year) by a specialized technician, this pe-
riodic check serves to ensure that all the compo-
nents installed and the machine itself are main-
tained at a high level of safety.
16
Warning: before resetting the temperature sensor,
switch off the machine using the relevant switch
and unplug it from the electriclty mains, then wait
for the machine to cool down.
Use a suitable tool (not included) to unscrew and
loosen and remove the protective screw:
Use hand to press the button inside to restore nor-
mal machine operation.
Any wom components must be replaced by an orig-
inal spare part.
It is forbidden to use the machine when even only
one of its components is faulty or wom. Users are
forbidden to perform periodic maintenance.