Hendi 274125 Mode D'emploi page 5

Machine description
Use of the machine
The machine for professional use you have purchased is intended to produce hot chocolate drinks,
Main components
The main components making up the machine are:
Operation
Starting up
1. Bowl lid
2. Bowl (5L for item 274125, 10L for item 274149)
3. Mixing auger
4. Bowl hook-on handles x2
5. Machine body
6. Main switch
7. Temperature regulator (°C)
8. Feet
9. Mixing paddle
10. Bottom pan
11. Lid for water boiler tank
12. Boiler tank
13. Product dispenser unit (tap)
14. Drip tray maximum level indicator
15. Drip tray grid
16. Drip tray
17. Boiler tank drainage cap
To start up the machine carry out the following
steps:
Make sure that the main switch (6) is set to off;
Take off the bowl lid (1)
Fill the boiler tank (12) with water using the boiler
tank level indicator tray, until it reaches the max-
imum value indicated on the tray itself, which is
marked –MAX-.
Warning: fill the boiler tank by pouring in water
slowly and check for a few seconds to make sure
that the water level has reached the –MAX-level
and that it is stable.
When filling an empty boiler tank for the first
time, the amount of water needed to completely
fill the tank is approximately 3.5 litres.
Open the bowl lid (1) and pour the chocolate into the
bowl (2).
EN
5