Hendi 274125 Mode D'emploi page 13

1.8.2. Assembling the tap
• A bowl correctly assembled; here the bowl per-
fectly adhere to the machine edge.
• A bowl which is not correctly assembled; here the
bowl does not perfectly adhere to the machine
edge.
• Fix the bowl to the machine body using the rele-
vant hook-on handles, as illustrated in the figure;
• Insert the mixer auger into its seating;
• Insert the mixer into its seating following the
steps described in paragraph 1.3 in inverse or-
der.
To assemble the tap, carry out in reverse all of the
disassembly steps illustrated previously.
To fit the level (F) push the rod (D) from the inside
until the guides protrude; the insert the level (F) and
slowly release the rod (D).
EN
13