Hendi 274125 Mode D'emploi page 10

1.4. Removing the tap
Removing the tap is prohibited if the bowl contains the product or any other liquid.
EN
1.5. Cleaning the pan
10
• Place the bowl on a flat surface and using both
hands, remove the gasket by sliding it upwards in
the direction shown by the arrow.
To remove the tap, proceed as follows:
• move the rod to the maximum dispensing posi-
tion;
• Press with some force to push the shaft (A) and
then remove the tap (B) with both hands, as illus-
trated in the figures;
It is necessary to remove all parts fitted to the pan.
• Remove any product left in the bowl, see para-
graph 1.2;
• Remove the bowl from the machine, see para-
graph 1.3;
• Remove the tap from the machine, see paragraph
1.4;
• Clean the entire surface of the pan using a damp
cloth and/or a non-abrasive sponge;
• Clean the channel connecting the bowl and the
tap, using a cleaning brush (not supplied), as il-
lustrated in the figure;