Table des Matières
Publicité
journal d'entretien
Supplier's Declaration of Conformity/Incorporation
WhisperPower Genverter models M-GV4
No.
41002005, 41002006, 41002055, 41002065, 49002005, 49002006
Issuer's name:
WhisperPower BV
Issuer's address: Kelvinlaan 82, NL-9207 JB Drachten
Object of the declaration:
The object of the declaration described above is in conformity with the requirements of the following Directives and standards, as
applicable:
Document
2004/108/EC
EN 61000-3-2:2014
EN61000-6-1: 2007
EN 61000-6-2: 2007
EN 61000-6-3: 2007+A1:2011
2006/95/EC
EN 60950:2000
2004/26/EC
2006/42/EC
EN 842:1996+A1:2008
ISO 12100:2010
The machinery is incomplete and must not be put into service until the machinery into which it is to be incorporated or the vessel into
which it is to be installed, has been declared in conformity with the provisions of the Directive.
We undertake to transmit, in response to a reasoned request by the appropriate national authorities, relevant information on the partly
completed machinery identified above.
Signed for and on behalf of:
WhisperPower BV
M. Favot,
Chief Technical Officer,
Drachten, November 10, 2014
The technical documentation for the machinery is available from:
WhisperPower BV, Kelvinlaan 82, 9207 JB Drachten, Netherlands
26
In accordance with EN ISO 17050-1:2004
Title
Electromagnetic Compatibility Directive
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions
(equipment input current ≤ 16 A per phase)
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential,
commercial and light-industrial environments
Electromagnetic compatibility (EMC) -- Part 6-2: Generic standards - Immunity for industrial
environments
Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for
residential, commercial and light-industrial environments
Low Voltage Directive
Safety of information technology equipment
Non-Road Mobile Machinery Exhaust Emissions Directive
Machinery Directive
Safety of machinery - Visual danger signals - General requirements, design and testing
Safety of machinery - General principles for design - Risk assessment and risk reduction
M-GV4 Piccolo — Octobre 2017— FR WMS
Publicité
Table des Matières
