WAGNER Plast Coat PC 25 Mode D'emploi page 27

Plast Coat 25 · 35
Contents
1 SAFETY REQUIREMENTS _____________________ 28
2 INTRODUCTION TO WORKING WITH THE MORTAR
SPRAYING MACHINES PLASTCOAT 25 AND 35 __ 29
2.1 Operation of the mortar spraying machines
PlastCoat 25 and 35 __________________________ 29
2.2 What materials can be sprayed? _________________ 29
3 TECHNICAL DATA PLASTCOAT 25 AND 35 ______ 29
4 EQUIPMENT OVERVIEW - MORTAR SPRAYING
MACHINES PLASTCOAT 25 AND 35 ____________ 30
4.1 Control unit ________________________________ 31
4.1.1 Symbols on the changeover switch ______________ 31
4.2 Drive ______________________________________ 31
4.3 Receptacle _________________________________ 31
Accessories for the receptacle __________________ 32
4.3.1 Sliding cover ________________________________ 32
4.3.2 Sack mangle ________________________________ 32
4.3.3 Container suction system ______________________ 32
4.4 Compressor (accessory) ______________________ 32
4.5 Mortar hose ________________________________ 32
4.6 Spray lance ________________________________ 33
5 TRANSPORT ________________________________ 33
5.1 Transport using a crane ________________________ 33
6 COATING MATERIALS EQUIPMENT TABLE
PLASTCOAT 25 AND 35 ___________________ 34/35
7 PLACING INTO OPERATION __________________ 36
8 General requirements for application
technology _________________________________ 38
9 FITTING ACCESSORIES ___________________ 39/40
9.1 Compressor _________________________________ 39
9.2 Sack mangle ________________________________ 39
Using coating materials in sacks _________________ 40
9.3 Container suction system ______________________ 40
10 PLACING OUT OF OPERATION AND CLEANING _ 40
10.1 Cleaning the mortar hose _____________________ 40
10.2 Cleaning device and changing pump jacket _______ 41
10.3 Cleaning spray lance __________________________ 42
11 SERVICING _________________________________ 42
Electrical equipment __________________________ 42
Long-term storage ___________________________ 42
12 MALFUNCTION CHECKLIST _______________ 42/43
13 SPARE PARTS LIST - PLASTCOAT 25 AND 35 ____ 44
SPARE PARTS ILLUSTRATION -
PLASTCOAT 25 AND 35 ______________________ 97
14 SPARE PARTS LIST - SPRAY LANCE ____________ 45
15 SPARE PARTS LIST AND SPARE PARTS
ILLUSTRATION - COMPRESSOR V 400__________ 46
16 SPARE PARTS LIST AND SPARE PARTS
ILLUSTRATION - CONTAINER SUCTION SYSTEM 47
17 ACCESSORIES - PLASTCOAT 25 AND 35 ________ 48
ACCESSORIES ILLUSTRATION -
PLASTCOAT 25 AND 35 ___________________ 98/99
Important notes on product liability _________________ 102
Warranty ____________________________________102/103
Declaration of conformity ______________________ 108
WAGNER-customer service depots __________________ 112
GB
CONTENTS
27