tau D703 Mode D'emploi page 10

MANUFACTURER'S DECLARATION OF INCORPORATION
(in accordance with European Directive 2006/42/EC App. II.B)
Manufacturer:
Address:
Declares under its sole responsibility, that the product:
designed for automatic movement of:
for use in a:
complete with:
Model:
Type:
Serial number:
Commercial name:
Has been produced for incorporation on an access point (sliding gate) of for assembly with other devices used
to move such an access point, to constitute a machine in accordance with the Machinery Directive 2006/42/EC.
Also declares that this product complies with the essential safety requirements of the following EEC directives:
- 2006/95/EC Low Voltage Directive
- 2004/108/EC Electromagnetic Compatibility Directive
EN 50081-1 (1992); EN 61000-3-2 (1995) + EN 61000-3-2/A1 (1998) + EN 61000-3-2/A2 (1998) +
EN 61000-3-2/A14 (2000); EN 61000-3-3 (1995); EN 61000-6-2 (2000)
and, where required, with the Directive:
- 1999/5/CE Radio equipment and telecommunications terminal equipment
Also declares that it is not permitted to start up the machine until the machine in which it is incorporated or of
which it will be a component has been identified with the relative declaration of conformity with the provisions of
Directive 2006/42/EC.
The manufacturer undertakes to provide, on sufficiently motivated request by national authorities, all information
pertinent to the quasi-machinery.
Sandrigo, 31/03/2010
Name and address of person authorised to draw up all pertinent technical documentation:
Loris Virgilio Danieli - via E. Fermi, 43 - 36066 Sandrigo (Vi) Italy
10
Electronic control unit
Sliding Gates
Communities / Industrial
-
D703
D703
see silver label
Control panel for 230/400 Vac single/three-phase
motor
Legal Representative
_________________________________________
Bruno Danieli
D703
TAU S.r.l.
Via E. Fermi, 43
36066 Sandrigo (Vi)
ITALY