Kemper MINI-TRESOR Instructions D'installation Et D'utilisation page 9

EN
Precautions for installation
Installation and operation
Read the manual carefully and follow the
instructions before installation!
Installation and maintenance must be
carried out by qualified plumbers.
Always pass on this manual to the current
system owner and keep it in a safe place for
future reference!
Warning! Priority must be given to the national
standards and provisions on sanitary
installations and accident prevention.
Warning! The installation location must be a closed,
dry and frost-free room that cannot be flooded.
Warning! Before completing the installation, it is
essential to carry out a leak test of the water-bea-
ring elements as well as a functional test.
Warranty
Warranty or liability are voided through:
- Disregard of installation instructions.
- Damage due to faulty installation.
- Unauthorised product modifications.
- Other incorrect operation.
Use
The built-in wall cabinet serves as a supply station
for the central water and power supply.
Any other uses constitute misuse.
Connection options: e. g. water and power connec-
tion for 230 V / 400 V, can be expanded on site, e.g.
by gas, telephone, antenna or waste water
connection, for private and commercial use.
Warning information
Please read and follow the warning information in
this instruction. Disregard of the warning informati-
on may lead to injury or material damage!
Labelling of important warning information:
Danger! Electricity!
Indicates hazards that might result
in severe or fatal injury.
Warning! Highlights risks that may
result in injury, material damage or
contamination of drinking water.
Note! Indicates hazards that may
lead to damages to the system or
malfunctions.
Info! Indicates additional
information and tips.
Important advice to the operator
Material: Stainless steel
Pressure rate valve: PN 16
Figure 214: especially for chlorine-based
environments (e.g. swimming baths)
Only use the TRESOR
- in sound condition
- as intended
Note! Note! The door lock can be
replaced with an existing locking system.
The door lock is a half cylinder according
to DIN 18252 / EN 1303, Hz 35 / Ø17.
The door lock must be replaced for this
purpose.
Note! The electrical and plumbing
installations must be carried out by
specialist installers.
Note! The complete Tresor must be
cleaned by a stainless steel cleaning
agent in regular intervals!
Care of the cabinet surface: Aggressive
and scour cleaning agents can damage
the surface. Don´t use chloric or acidic,
grinding or acidly cleaning agents.
Cleaning with a damp micro-fibre cloth
is recommended.
© www.kemper-olpe.de – 11.2021 / K410021000001-00 – 9 /36