Kemper MINI-TRESOR Instructions D'installation Et D'utilisation page 10

EN
Note! In some countries the use of
combination units with water and
electric is not permitted. Please follow
the specific regulations for the relevant
country, if you want to install the
product outside of Germany.
Note! In case of assembly the Tresor in
swimming pools or facilities with
compareable ambient conditions, a
regular cleaning of the complete Tresor
is necessary as described before.
Danger! According to VDE requirements
KEMPER MINI-TRESOR for power and
water connection have to fuse by a
residual current circuit breaker
(residual current 0,03A). This applies to
all sockets in outdoor area.
Disposal
Local regulations on waste
recycling and disposal must be
followed. The product must not be
disposed of with household waste
but must rather be disposed of
appropriately.
Description
1 Built-in wall cabinet (basic body)
2 4 attachment screws for built-in cabinet (4.8 x 80)
3 Frost-proof outdoor valve or hose bibb
4 2 attachment screws (M6 x 12)
5 Socket to fit selected Figur type
6 Mounting plate
7 Wing-screws
8 Trim frame and door with flap
9 Spray protection plate
10 2 attachment screws (M6 x 12)
11 Door lock with 3 keys
© www.kemper-olpe.de – 11.2021 / K410021000001-00 – 10 /36