General Informations - Riello BS2/M TL Manuel D'entretien

8. GENERAL INFORMATION
IDENTIFICATION
The Identification Plate on the product gives the serial number, model and main technical and performance
data. If the Identification Plate is tampered with, removed or missing, the product cannot be clearly identified
thus making any installation or maintenance work potentially dangerous.
GENERAL WARNINGS
The dimension of the boiler's combustion chamber must respond to specific values, in order to guarantee a
combustion with the lowest polluting emissions rate.
The Technical Service Personnel will be glad to give you all the imformation for a correct matching of this
burner to the boiler.
This burner must only be used for the application it was designed for.
The manufacturer accepts no liability within or without the contract for any damage caused to people, ani-
mals and property due to installation, adjustment and maintenance errors or to improper use.
USER INFORMATION
If faults arise in ignition or operations, the burner performs a "safety stop", which is signalled by the red
burner lock out Led. To rearm start up conditions, press the release button.
When the burner starts up again, the red Led goes out. This operation can be repeated for a maximum of 3
times.
If the "safety stop" recurs, then the Technical Assistance Centre must be called out.
BASIC SAFETY MEASURES
Children or inexpert persons must not use the appliance.

Under no circumstances must the intake grids, dissipation grids and ventilation vents in the installation

room be covered up with cloths, paper or any other material.
Unauthorised persons must not attempt to repair the appliance.

It is dangerous to pull or twist the electric leads.

Cleaning operations must not be performed if the appliance is not disconnected from the main power supply.

Do not clean the burner or its parts with inflammable substances (e.g. petrol, alcohol, etc.). The cover

must be cleaned with soapy water.
Do not place anything on the burner.

Do not block or reduce the size of the ventilation vents in the installation room.

Do not leave containers and inflammable products in the installation room.

3134
16 GB