Thrustmaster T-GT Mode D'emploi page 301

SETTING UP THE RACING WHEEL FOR PC
Important notes:
- On PC, the USB sliding switch (11) on the racing wheel's base must always be set to the OTHER
position.
- On PC, the 2 mini-sticks (6) are functional.
- On PC, the 4 rotary selectors with Push function (5) are functional.
- On PC, the Force Feedback system is functional, but the T-DFB effects system (16) is not.
1. Go to http://support.thrustmaster.com to download the drivers and the force feedback software for PC.
Click Wheels / T-GT, then select Drivers.
2. Once the download is complete, launch the installation, and follow the on-screen instructions to
connect the wheel's USB plug to your computer and complete the installation.
3. Once the installation is complete, click Finish and restart your computer.
4. Select Start / All Programs / Thrustmaster / FFB Racing Wheel / Control Panel to open the Game
Controllers window.
The Game Controllers window displays the racing wheel's name Thrustmaster T-GT Racing Wheel with
the status OK.
5. Click Properties to configure your wheel in the T-GT control panel:
• Test Input tab: allows to test and view the 25 action buttons, 4 rotary selectors with Push function,
directional buttons, wheel axes, 2 mini-sticks axes, pedals axes, and to adjust the wheel's rotation angle
in your PC games.
• Test Forces tab: allows to test 12 force feedback effects.
• Gain Settings tab: allows to adjust the power of the force feedback effects in your PC games.
You are now ready to play!
General notes:
- On PC, click OK to close the Game Controllers window before launching the game.
- On PC, the adjustments made in the Game Controllers window will only be saved on your computer
(hence they will have no effect on the PlayStation 4 system).
®
- Your wheel's firmware version is displayed in the upper right-hand corner of the T-GT control panel tabs.
AUTOMATIC RACING WHEEL AND PEDAL SET CALIBRATION
The wheel automatically self-calibrates when you plug the racing wheel into an electrical outlet and
connect the racing wheel's USB connector to the system.
During this phase, the racing wheel will rotate quickly towards the left and the right, covering a 1080
degree angle, before stopping at the center.
WARNING:
Never touch the racing wheel during the self-calibration phase!
(This could result in improper calibration and/or personal injuries.)
12/24