Accessories; Standard Accessories; Optional Accessories - Hitachi CJ 18DGL Instructions De Sécurité Et Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Important notice on the batteries for the Hitachi
cordless power tools
Please always use one of our designated genuine
batteries. We cannot guarantee the safety and
performance of our cordless power tool when used
with batteries other than these designated by us, or
when the battery is disassembled and modifi ed (such
as disassembly and replacement of cells or other
internal parts).
WARNING
ALWAYS use Only authorized HITACHI replacement parts and accessories. Never use replacement parts or
accessories which are not intended for use with this tool. Contact HITACHI if you are not sure whether it is
safe to use a particular replacement part or accessory with your tool.
The use of any other attachment or accessory can be dangerous and could cause injury or mechanical
damage.
NOTE
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

CJ18DGL
(NN)
Battery, battery charger, and battery cover are not contained.
OPTIONAL ACCESSORIES.....sold separately
1.
Battery (BSL1815) (Code No. 333353)
Battery (BSL1830C) (Code No. 339782)
2.
Battery charger (UC18YKSL)
3.
Battery cover (Code No. 329897)
4.
Blade
No. 1 Blade (Long) (Code No. 879227)
No. 1 Blade (Super Long) (Code No. 321878)
No. 11 Blade (Code No. 963390)
No. 12 Blade (Code No. 963391)
No. 15 Blade (Code No. 963392)
No. 16 Blade (Code No. 963393)
No. 21 Blade (Code No. 963394)
No. 22 Blade (Code No. 963395)
No. 41 Blade (Code No. 879357)
No. 97 Blade (Code No. 963400)
To ensure maximum operating effi ciency and results, it is very important to select the appropriate blade best suited to
the type and thickness of the material to be cut. Two types of blades are provided as standard accessories. The blade
number is engraved in the vicinity of the mounting portion of each blade. Select appropriate blades by referring to Table 4.
NOTE
Specifi cations are subject to change without any obligation on the part of the HITACHI.

ACCESSORIES

Blade for wood ................................................................................................................. 2
Blade for steel ................................................................................................................. 1
Hex. bar wrench ...............................................................................................................1
English
17

Publicité

Table des Matières
loading

Table des Matières