IKA A10 basic Mode D'emploi page 22

If grinding dust is found in the cavity below the grinding
container, please clean it with included cleaning brush (see
Fig. 14).
You can also clean it with a vacuum cleaner (see Fig. 15).
Interior of the device can be cleaned with compressed air
via the drain hole (see Fig. 16).
Note: be aware of the threat by dusting!
If there is heavy accumulation of dirt on this area, please
wiped clean with a moist cloth. Never clean it in water or
in a dishwasher.
Use only cleaning agents which have been approved by
IKA ® to clean the instrument and all parts.
Dirt
Dyes
Construction materials
Cosmetics
Foodstuffs
Fuels
For materials which are not listed, please request informa-
tion from IKA
Wear protective gloves during cleaning the instrument.
Electrical devices may not be placed in the cleansing agent
for the purpose of cleaning.
Fig. 14
Do not allow moisture to get into the equipment when
cleaning.
Before using another than the recommended method for
Fig. 15
cleaning or decontamination, the user must ascertain with
IKA ® that this method does not destroy the instrument.
Spare parts order
When ordering spare parts, please give:
- machine type
- serial number, see type plate
- item number and designation of the spare part,
see www.ika.com, spare parts diagram and spare
parts list,
- Software version.
Repair
Please send equipment for repair only after it has
been cleaned and is free from any materials which
may constitute a health hazard.
For this, you should request the "Decontamination
Certificate" from IKA
it from the IKA
If you require servicing, return the equipment in its original
packaging. Storage packaging is not sufficient. Please also
use suitable transport packaging.
Fig. 16
Cleaning agent
isopropyl alcohol
water containing tenside/
isopropyl alcohol
water containing tenside/
isopropyl alcohol
water containing tenside
water containing tenside
.
®
, or use the download printout of
®
® website www.ika.com.
22