Ingersoll Rand ENL 10 Service-Unit Instructions De Montage Et De Service page 6

EN
6
4. CONTROL ANd mAINTENANCE
maintenance including the cleaning of the condensate
receiver tank:
ingersollrandproducts.com
1. Remove the control unit (1...8) by pressing the
arresting hook (23).
2. Unfasten the ENL 10 Service unit from the outlet.
3. Detach the ENL 10 Service unit from the tubing at the
inlet.
4. Unscrew both M6 cross recessed head screws (22)
and remove the service unit (9) by slightly pulling and
lifting it.
5. Remove the design shell (11) using a screwdriver.
6. Unscrew the four cover screws (16) and remove the
cover (17).
7. Clean the condensate receiver tank (19).
3847892