Télécharger Imprimer la page

Redmond RMC-250A Manuel De L'utilisateur page 13

Publicité

Les langues disponibles

Les langues disponibles

REHEAT button indicator lights up, timer counts KEEP WARM time)
or standby mode.
8. To stop the cycle, to cancel the program, press and hold down the
CANCEL/REHEAT button.
MULTICOOK Program
The program can be used to cook any dish with your own time and tem-
perature settings. The device automatically disables the KEEP WARM
function if operating temperature of the program is below 170°F (75°С).
Press the START/KEEP WARM button during the program to enable the
function (the CANCEL/REHEAT button indicator lights up).
You can manually set 28 temperature adjustments from 95°F (35°C) to
340°F (170°С).
CAUTION! Cook time must never exceed 2 hours if the temperature
is above 280°F (140°С).
Cook time can be adjusted from 2 minutes to 15 hours in 1 minute inter-
vals (for a period of 2 minutes up to 1 hour) and 5 minute intervals (for
a period of 1 hour up to 15 hours).
1. Follow steps 1–4 of "Standard operating Procedure for Automatic
Programs".
2. Use the TEMP button to adjust the temperature. The TEMP button
indicator lights up, The START/KEEP WARM, OK, TIME DELAY, and "+",
"–" button indicators start blinking. Use "+" to increase and "–" to
decrease the temperature. Press and hold the corresponding button
down to scroll through the digits. When the maximum value is reached
the device goes back to the minimum value.
3. Follow steps 5–8 of "Standard Operating Procedure for Automatic
Programs".
STEW/CHILI Program
The program is recommended for stewing meat, fish, and vegetable. Make
meat, vegetarian, poultry chili. Default time is 1 hour. It can be adjusted
from 20 minutes to 8 hours in 5 minute intervals.
BAKE Program
The program is recommended for baking cakes, pies, puddings, puff and
yeast pastry. Default time is 1 hour. It can be adjusted from 20 minutes
to 8 hours in 5 minute intervals. We recommend disabling KEEP WARM
when baking.
BOIL Program
The program is recommended for boiling vegetables, fish, meat, and dif-
ferent legumes. Default time is 40 minutes. It can be adjusted from 5
minutes to 4 hours in 5 minute intervals.
SOUP Program
The program is recommended for making different types of soup, broth.
Default time is 1 hour. It can be adjusted from 20 minutes to 6 hours in 5
minute intervals.
SAUTE Program
The program is recommended for sauteing meat, fish, poultry, vegetables,
and seafood. Default time is 15 minutes. It can be adjusted from 5 minutes
to 1 hour and 30 minutes in 1 minute intervals. The TIME DELAY function
is not applicable for the program.
Saute with an open lid unless otherwise stated in the recipe. To prevent food
from burning follow instructions given in the recipe book and stir the ingre-
dients thoroughly while sautéing. Let the device cool down before the next
use in SAUTE.
RICE/GRAINS Program
The program is recommended for cooking rice and other grains. Default
time is 35 minutes. It can be adjusted from 5 minutes to 4 hours in 5
minute intervals.
PASTA Program
The program is recommended for cooking pasta, eggs, etc. Default time
is 10 minutes. Cooking time can be manually adjusted from 2 to 30 min-
utes with 1 minute intervals. The TIME DELAY function is not applicable
for the program.
The countdown starts after the appliance reaches the required operating
RMC-250A
ENG
13
13

Publicité

loading