Publicité
Les langues disponibles
Les langues disponibles
b) Pour the beverage into the machine:
WARNING: Beverage should be poured into the
bowl (2) only when the machine is OFF (0) and un-
plugged from the electrical power supply. DO NOT
pour hot beverage.
ATTENTION: Pour the beverage into the LEFT bowl
(2) that on temperature control box (4) side if LEFT
bowl (2) is being used only.
• Remove the bowl lid (1) of the bowl (2).
• Pour the beverage into the bowl (2) with care and
ensure between MIN and MA level. (See Fig. 7).
• After pouring/refilling the beverage into the bowl
(2), close the bowl lid (1) on top of the bowl (2).
c) Start operating the machine:
• Press down the cover of the main switch box (4)
at RIGHT side of the machine. Then, switch box
cover will then release.
• Switch ON the machine by pressing down but-
ton (a) to the "I" position. Red indicator lights ON.
Cooling process will then start.
• Press down either the stirring button (b) [for
LEFT bowl] or button (c) [for RIGHT bowl] to the
"I" position for rotating the paddle.
EN
• Press down all buttons (a), (b) & (c) to the position
"0" position to switch OFF the machine.
d) Setting the temperature:
• Similarly, press down the lower part of temper-
ature box cover at LEFT side of the machine.
Then, temperature box cover will then release.
• Rotate the temperature control knob (d) to set the
temperature of the bowl (2).
• Temperature range for selection [Level 02 (2°C)
~ Level 08 (8°C)].
e) Dispensing the beverage:
• Once the beverage is sufficiently cooled, push the
tap lever (7) to dispense the drink.
Note:
• Regularly check the temperature of the beverage
in the bowl (2). Keep the machine running when
there is any liquid inside the bowl (2).
• If the machine is not continuously operated, it is
necessary to dispose of the small amount from
the tap area before serving for the customer for
the reason of hygiene.
8
MA
MIN
(a)
(b)
(d)
Fig. 7
(c)
Publicité
