To Finish Using The Current Operating Mode; Setting The Timer - Miele SLQL0 Mode D'emploi

 Press the Mode button repeatedly
until the symbol for the operating
mode you want lights up in the dis-
play.
 Press the  button to start vacuum-
ing.
Option 2 (Display)
 Press the sensor for the operating
mode you want to use.
 Press the  sensor to start vacuum-
ing.
To finish using the current operating
mode
 Press the Power button on the re-
mote control or the  sensor on the
display for at least three seconds.
The robot vacuum cleaner will switch
into standby after approx. 60 seconds.
You can switch the robot vacuum
cleaner into standby before
60 seconds is up by pressing the
Power button again.
The robot vacuum cleaner is reactivated
by pressing any button on the remote
control or one of the sensors in the dis-
play.

Setting the timer

(only possible if the clock has been set)
If you would like the robot vacuum
cleaner to start at the same time every
day, you can save the start time and the
operating mode you want to memory.
The robot vacuum cleaner can also va-
cuum in the dark. However, please be
aware that vacuuming may be less thor-
ough. The cameras require light in order
to navigate unobstructed.
Use the remote control to set the timer.
 Press the Timer button briefly.
The timer  indicator flashes in the dis-
play and the hour display flashes in the
indicator field.
 Press the + or - direction button to
set the hour you want.
en
53